Fronius RCU 5000i - Incrementing the Component Number

To Next Page

To Previous Page

149

Incrementing the

component num-

ber

Incrementing the part number can be performed manually using F1 and F2 or by job.

"Part number counter" screen, parameter "Increment"

set to "Manual"

Call up the "Documentation" menu

item

Select "Component counter" screen by

pressing the right arrow key (8)

– "Component counter" screen ap-

pears

Select the "Increment" parameter

using the down (6) or up (7) keys

"Component counter" screen with manually incremen-

ted component number

Manual incrementing

Set "Increment" parameter to "Manual"

using the adjusting dial (18)

–

To increment the part number press F2

"+", to reduce the number press F1 "-"

– The component number is in-

cremented (or decremented).

"Component counter" screen with incrementing of

component number by job no. 5

Incrementing by job

Set "Increment" parameter to "Job"

using the adjusting dial (18)

Enter the number of the job whose

component number is to be incremen-

ted using the "Job trigger" parameter.

– The part number is incremented

each time the job specified in the

"Job trigger" parameter is selec-

ted.

IMPORTANT! If the "Increment" pa-

rameter is set to "Manual", the value

of the "Job trigger" parameter has no

effect on incrementing the part num-

ber.

Related product manuals