148
"Enter component number" screen
Select corresponding characters using
the adjusting dial (18)
Press F4 ">" to enter the next charac-
ter
– Corrections can be carried out
using F3 "<" or F2 "< Delete"
Press F1 "Accept" when finished:
"Component counter" screen with new component
number
The new component number is accepted,
the "Component counter" screen appears.
Example of a part number with separator:
This gives a range of possible component numbers from K10-0002 to K10-9999.
5
6
7
K10-0002
4-digit final number (will be increased up to max. 9999)
Separator
Characters before the separator remain unchanged
To Next Page
Loading...