29
EN
Starting se-
quence - lan-
guage setting
The following appear on the display during the starting sequence:
- Fronius logo (centre)
- Software version (bottom left)
- www.fronius.com (bottom right)
- language (F3 key)
The starting sequence lasts approx. 2 seconds. The language and units (metric or imperial)
can be preset during this time. To do this, press F3.
Starting sequence, F3 "Language"
To preset the language and measure-
ment units, press F3 "Language"
– Machine pre-sets "Language and
units" screen appears
Machine pre-sets: "Language and units" screen, lan-
guage selected
Select the corresponding parameters
using down (6) or up (7) keys
Alter the parameter value with the ad-
justing dial (18)
Press the "Menu" button (1)
1
2
3
4
To Next Page
Loading...