164
MIG/MAG synergic welding: "Working parameters"
screen, trigger mode selected - F5 "Int/Ext" disabled
Other functions in
robot welding
Selecting menu items
In robot welding, the following menu items can be selected:
- Welding process currently selected by the robot
- Optimizing & managing jobs
- Optimizing & managing characteristics
- Documentation
- Default machine settings
Selectable menu items and the welding process currently selected by the robot are shown
as black, other welding processes are shown as grey, e.g.:
Example 1: "Menu" screen in robot welding, "Job wel-
ding" currently selected by robot (shown as black),
"Machine pre-sets" menu item selected by the user
Example 2: "Menu" screen in robot welding, "MIG/
MAG synergic welding" currently selected by robot
(shown as black), and also selected by the user
If the welding process currently selected by the robot is changed, this is also shown in the
"Menu" screen.
Changing displayed "Data" screens (only for welding processes)
If the welding process currently highlighted by the robot is selected by the user, the corre-
sponding "Data" screens appear. If the robot changes the welding process, the "Data"
screen display also changes according to the new welding process.
To Next Page
Loading...