24
Description of the displays
General The RCU 5000i remote control unit uses various displays while operating. These so-called
screens are called up using the menu, and serve as dialog with the user.
"Menu" screen The "Menu" screen shows the main menu. To call up the "Menu" screen, press the Menu
key (1).
"Menu" screen
(1) Menu items
(2) MIG/MAG synergic welding menu
item selected
(3) F3 "Select"
"Data" screen - A "Data" screen appears if a menu item is selected in the main menu.
- Each "Data" screen contains a "clothesline".
- Many different "Data" screens can be displayed within one menu item.
By using special functions on the power source or certain parameter settings, further
"Data" screens can be hung onto the relevant "clothesline".
- In the "Data" screens, parameters can be set or viewed. The parameters are repre-
sented in a list.
Parameters are selected using the down and up navigation keys (6) and (7).
Parameter values are set using the adjusting dial (18)
NOTE! Once the Menu key (1) is pressed, all open dialogs are cancelled without
asking for confirmation, with the exception of wizards.
(1)
(3)
(2)
To Next Page
Loading...