Fronius RCU 5000i - MIG;MAG Synergic Welding; General; Call up MIG;MAG Synergic Welding Menu Item; Overview

34
MIG/MAG synergic welding
General MIG/MAG synergic welding relates to synergic mode on the power source. Once the wire-
feed speed parameter is set, the welding current and sheet thickness parameters are ad-
justed accordingly.
The current welding amperage and sheet thickness values appear in the display area.
Call up "MIG/MAG
synergic weld-
ing" menu item
Main menu: "MIG/MAG synergic welding" menu item
selected
Press the "Menu" button (1):
– Main menu appears
Select "MIG/MAG synergic welding"
menu item using the adjusting dial (18)
Press OK (3):
– The last "Data" screen called up
appears.
Overview "MIG/MAG synergic welding" is composed of the following sections:
- Retrieving a welding program
- Setting working parameters
- Switching to extra-large display
- Setting process settings parameters
- Setting additional parameters: special 2-step, special 4-step, spot welding
- Setting SynchroPuls parameters
1
2
3