105
EN
"Insert characteristic point" screen - "Calculate" selec-
ted
Using the adjusting dial (18), choose
whether to calculate or to copy the cha-
racteristic point
Calculating a characteristic point:
Press F2 "Forward":
– The 2nd screen in the wizard ap-
pears ("Calculate characteristic
point")
"Calculate characteristic point" screen - entering wire
feed speed
using the adjusting dial (18), enter wi-
refeed speed for which the new cha-
racteristic point is to be calculated
Press F2 "Forward":
– The 3rd screen in the wizard ap-
pears as confirmation ("Calculate
characteristic point")
– By pressing F1 "Back", the
screens of the steps already per-
formed can be displayed again.
Changes can be made.
"Calculate characteristic point" screen - confirmation
Press F2 "Done"
4
5
6
7
8
To Next Page
Loading...