188
"Name key" screen
Select corresponding characters using
the adjusting dial (18)
Press F4 ">" to enter the next charac-
ter
– Corrections can be carried out
using F3 "<" or F2 "< Delete"
Press F1 "Accept" when finished:
– The new name is accepted, "Ch-
ange name" screen appears
"Change name" screen
Press F2 "Forward":
– The 2nd screen in the wizard ap-
pears ("Register transponder")
"Change transponder" screen
Hold the keycard to be registered up to
the keycard reader (16)
– Only when a key card has already
been registered does the "Error -
key already exists" screen appear
5
6
7
IMPORTANT! Do not duplicate any keys.
Assign one key card to each user.
8
9
To Next Page
Loading...