Fujitsu Eternus web GUI - Page 221

Chapter 8 Advanced Copy Management
8.2 Functions in the Action Area for Advanced Copy
ETERNUS Web GUI User’s Guide
221
Copyright 2011 FUJITSU LIMITED P2X0-1090-02ENZ0
■ Register Base Information
In this screen, register the device information to which the REC path is created.
Procedure
1 Select a device information selection method in the [Base Information Selection]
screen, and click the [Next] button.
• Base Information
- Backup Path File
The copy path information file previously applied is used.
- Path File
The copy path information file stored in the ETERNUS DX Disk storage system is
used.
- Not use
Copy path is created manually.
The displayed screen is different depending on the selected item.
■ When selecting "Backup Path File"
→ The [Check Registered Device Information] screen appears. Proceed to Step 3
.
■ When selecting "Path File"
→ The [Copy Path Information File Selection] screen appears. Proceed to Step 2
.
■ When selecting "Not use"
→ The [Device Information File Selection] screen appears. Proceed to Step 7
.