EasyManua.ls Logo

Fujitsu Eternus web GUI - Page 497

Fujitsu Eternus web GUI
635 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 11 System Management
11.2 Functions in the Action Area for System
ETERNUS Web GUI User’s Guide
497
Copyright 2011 FUJITSU LIMITED P2X0-1090-02ENZ0
11.2.3.17 Register SSL Certificate
This function registers the SSL server key, which was downloaded by using the [Create Key/
CSR] function, and the SSL server certificate which was acquired from the certification authority.
The procedures to create SSL server key and the SSL server certificate are as follows:
Procedure
1 Click [Register SSL Certificate] in [Action].
The HTTPS connection from GUI is disabled in the factory settings.
There are two types of SSL certificate formats: the "SSL Server
Certificate" and the "Self-signed SSL Certificate". The "SSL Server
Certificate" is registered by using this function and the "Self-signed SSL
Certificate" is created by using the procedure in "11.2.3.15 Create Self-
signed SSL Certificate" (page 490). Register one of the certificates in
the ETERNUS DX Disk storage system when using the HTTPS
connection.
To obtain the "SSL Server Certificate", the Certificate Signing Request
(CSR) that is downloaded using the procedure in "11.2.3.16 Create Key/
CSR" (page 492) must be send to the certification authority.
Register the SSL server key and the SSL server certificate as a pair in
the ETERNUS DX Disk storage system. If the combination of the SSL
server key and the SSL server certificate is incorrect, accessing from
GUI via the HTTPS connection is not possible.
After the SSL server key and the SSL server certificate have been
created, the information must be updated in the device before accessing
from GUI via the HTTPS connection. Log out from GUI and wait a few
minutes before logging in again.
When the SSL server key and the SSL server certificate have been
registered in the ETERNUS DX Disk storage system, the setting PC,
which has accessed from GUI via the HTTPS connection, will be forced
to disconnect.
The SSL server key downloaded using the procedure in "11.2.3.16
Create Key/CSR" (page 492) and the "SSL server certificate"
acquired from the certification authority are required before this
action.

Table of Contents

Related product manuals