© 2011 Fujitsu Technology Solutions
339
9.5.2.2 IP DSCP Mapping
Figure : Class of Service IP DSCP Mapping
Selection Criteria
Unit/Slot/Port - Specifies all CoS configurable interfaces. The option "Global" represents the most
recent global configuration settings.
Configurable Data
IP DSCP Traffic Class - Specify which internal traffic class to map the corresponding IP DSCP
value. Valid Range is (0 to 7) .
Non-Configurable Data
IP DSCP Value - Specify the IP DiffServ Code Point (DSCP) Value.
Command Buttons
Apply - Send the updated configuration to the switch. Configuration changes take effect
immediately. These changes will not be retained across a power cycle unless a save is performed.
Restore Defaults - Restores default settings.
To Next Page
Loading...
