Fujitsu PRIMERGY BX900 - Page 432

© 2011 Fujitsu Technology Solutions
430
10.4.5.5 vtp
This command uses to configure global VTP administrative mode.
Syntax
vtp
no vtp
no - This command disables global VTP administrative mode.
Default Setting
Disabled
Command Mode
Global Config
10.4.5.6 vtp domain
This command uses to set VTP administrative domain name.
Syntax
vtp domain <string>
no vtp domain
<string> - Configures the string for domain name. (maximum length 32 bytes)
no - This command resets the domain name to NULL.
Default Setting
None
Command Mode
Global Config