Fujitsu PRIMERGY BX900 - Page 458

© 2011 Fujitsu Technology Solutions
456
10.4.8.2 Configuration Commands
10.4.8.2.1 ipv6 mld snooping
The user can go to the CLI Global/Interface Configuration Mode to set MLD Snooping on the system or
an Interface, use the ipv6 mld snooping global/interface configuration command. Use the no ipv6 mld
snooping to disable MLD Snooping on the system or an Interface.
Syntax
ip mld snooping
no ip mld snooping
Default Setting
Disable
Command Mode
Global Config, Interface Config
10.4.8.2.2 ipv6 mld snooping interfacemode
The user can go to the CLI Global/Interface Configuration Mode to set MLD Snooping on one interface
or all interfaces, use the ipv6 mld snooping interfacemode global/interface configuration command.
Use the no ipv6 mld snooping interfacemode disable MLD Snooping on all interfaces.
Syntax
ipv6 mld snooping interfacemode <all>
no ipv6 mld snooping interfacemode <all>
Default Setting
Disable
Command Mode
Global Config, Interface Config