Fujitsu PRIMERGY BX900 - Page 459

© 2011 Fujitsu Technology Solutions
457
10.4.8.2.3 ipv6 mld snooping fast-leave
The user can go to the CLI Global/Interface Configuration Mode to set MLD Snooping fast-leave admin
mode on a selected interface or all interfaces, use the ipv6 mld snooping fast-leave global/interface
configuration command. Use the no ipv6 mld snooping fast-leave disable MLD Snooping fast-leave
admin mode.
Syntax
ipv6 mld snooping fast-leave
no ipv6 mld snooping fast-leave
Default Setting
Disable
Command Mode
Global Config, Interface Config
10.4.8.2.4 ipv6 mld snooping groupmembershipinterval
The user can go to the CLI Global/Interface Configuration Mode to set the MLD Group Membership
Interval time on one interface or all interfaces, use the ipv6 mld snooping groupmembershipinterval
<2-3600> global/interface configuration command. Use the no ipv6 mld snooping
groupmembershipinterval return to default value 260.
Syntax
ipv6 mld snooping groupmembershipinterval <2-3600>
no ipv6 mld snooping groupmembershipinterval
Default Setting
260
Command Mode
Global Config, Interface Config