Fujitsu PRIMERGY BX900 - Page 460

© 2011 Fujitsu Technology Solutions
458
10.4.8.2.5 ipv6 mld snooping max-response-time
The user can go to the CLI Interface Global/Interface Configuration Mode to set the MLD Maximum
Response time for the system, on a particular interface, use the ipv6 mld snooping
max-response-time <1-65> global/interface configuration command. Use the no ipv6 mld snooping
max-response-time return to default value 10.
Syntax
ipv6 mld snooping max-response-time <1-65>
no ipv6 mld snooping max-response-time
Default Setting
10
Command Mode
Global Config, Interface Config
10.4.8.2.6 ipv6 mld snooping mcrtrexpiretime
The user can go to the CLI Interface Global/Interface Configuration Mode to set the Multicast Router
Present Expiration time for the system or on a particular interface, use the ipv6 mld snooping
mcrtrexpiretime <0-3600> global/interface configuration command. Use the no ipv6 mld snooping
mcrtrexpiretime to return to default value 0.
Syntax
ipv6 mld snooping mcrtrexpiretime <0-3600>
no ipv6 mld snooping mcrtrexpiretime
Default Setting
0
Command Mode
Global Config, Interface Config