Fujitsu PRIMERGY BX900 - Page 461

© 2011 Fujitsu Technology Solutions
459
10.4.8.2.7 ipv6 mld snooping mrouter interface
The user can go to the CLI Interface Configuration Mode to configure the interface as a multicast
router-attached interface or configure the VLAN ID for the VLAN that has the multicast router attached
mode enabled, use the ipv6 mld snooping mrouter interface interface|<vlanId> interface
configuration command. Use the no ipv6 mld snooping mrouter interface|<vlanId> disable multicast
router attached mode for the interface or a VLAN.
Syntax
ipv6 mld snooping mrouter interface interface|<vlanId>
no ipv6 mld snooping mrouter interface|<vlanId>
Default Setting
None
Command Mode
Interface Config
10.4.8.2.8 ipv6 mld snooping static
The user can go to the Global Mode and add a port to ipv6 multicast group, use the ipv6 mld snooping
static Global command.
Syntax
ipv6 mld snooping static <macaddr> vlan <vlan-id> interface <slot/port>
no ipv6 mld snooping static <macaddr> vlan <vlan-id> interface <slot/port>
Default Setting
None
Command Mode
Global Config