Fujitsu PRIMERGY BX900 - Page 707

© 2011 Fujitsu Technology Solutions
705
10.16.1.14 show port-security
This command shows the port-security settings for the entire system.
Syntax
show port-security
Default Setting
None
Command Mode
Privileged Exec
Display Message
Port Security Administration Mode: Port lock mode for the entire system.
This command shows the port-security settings for a particular interface or all interfaces.
Syntax
show port-security { <slot/port> | all }
Default Setting
None
Command Mode
Privileged Exec
Display Message
Intf: Interface Number.
Admin Mode: Port Locking mode for the Interface.
Dynamic Limit: Maximum dynamically allocated MAC Addresses.
Static Limit: Maximum statically allocated MAC Addresses.
Violation Trap Mode: Whether violation traps are enabled.
Violation Shutdown: Whether violation shutdown are enabled.