Fujitsu PRIMERGY BX900 - Page 708

© 2011 Fujitsu Technology Solutions
706
This command shows the dynamically locked MAC addresses for port.
Syntax
show port-security dynamic <slot/port>
Default Setting
None
Command Mode
Privileged Exec
Display Message
MAC address: Dynamically locked MAC address.
This command shows the statically locked MAC addresses for port.
Syntax
show port-security static <slot/port>
Default Setting
None
Command Mode
Privileged Exec
Display Message
MAC address: Statically locked MAC address.
This command displays the source MAC address of the last packet that was discarded on a locked port.
Syntax
show port-security violation <slot/port>
Default Setting
None
Command Mode
Privileged Exec
Display Message
MAC address: MAC address of discarded packet on locked ports.