© 2011 Fujitsu Technology Solutions
755
10.17.3.6 mark cos
This command marks all packets for the associated traffic stream with the specified class of service value
in the priority field of the 802.1p header. If the packet does not already contain this header, one is inserted.
The CoS value is an integer from 0 to 7.
Syntax
mark cos <0-7>
<0-7> - The range of COS value is 0 to 7.
Command Mode
Policy-Class-Map Config
Policy Type In
Incompatibilities
Drop, Mark IP DSCP, IP Precedence, Police
To Next Page
Loading...
