Fujitsu PRIMERGY BX900 - Page 758

© 2011 Fujitsu Technology Solutions
756
10.17.3.7 mark ip-dscp
This command marks all packets for the associated traffic stream with the specified IP DSCP value.
Syntax
mark ip-dscp <value>
<value> is specified as either an integer from 0 to 63, or symbolically through one of the following
keywords: af11, af12, af13, af21, af22, af23, af31, af32, af33, af41, af42, af43, be, cs0, cs1, cs2, cs3,
cs4, cs5, cs6, cs7, ef.
Command Mode
Policy-Class-Map Config
Policy Type In
Incompatibilities
Drop, Mark CoS, IP Precedence, Police
10.17.3.8 mark ip-precedence
This command marks all packets for the associated traffic stream with the specified IP Precedence value.
The IP Precedence value is an integer from 0 to 7.
Syntax
mark ip-precedence <0-7>
Command Mode
Policy-Class-Map Config
Policy Type In
Incompatibilities
Drop, Mark (all forms)