Fujitsu PRIMERGY RX1330 M5 User Manual

Copyright 2021 FUJITSU LIMITED
List of all used screws for PRIMERGY Servers / Assembled in Germany and Japan Page 9 / 9
Denotation scheme
S1xx : Screws M1x
S2xx : Screws M2x
S3xx : Screws M3x
S4xx : Screws M4x
S5xx : Screws for special application
S6xx : Bolts
Document History:
Date
Item
Description
04. July 2017
05. July 2017
Name of a tool for fastening
hexagon bolt
Old: “hexagon nut”
New: “hexagon spanner head”
hexagon screw driver
27. July 2017
S306 F6-SW2N3-06121
Changed part number of the
screw
07. November 2018
Screw C26361-Y10-C133 added
Screw delivered with
PDUAL AP200 kit
09. November 2018
Bolt C26361-B443-C210
Screw C26361-B443-C220
Bolt and screw for M.2 on board
09. January 2019
C26361-Y10-C133 Flat head
screw is part of PDUAL AP200
kit
19. February 2019
: A3C40218449
Kurled screw RAID controller and
RX2530 M5
10. May 2021
Adding RX25x0/RX4770 M6
ODM screws
To creat some new S number
screws
24. May 2021
Adding TX1330M5 ODM screws
and change hexagon head tool to
PH2
See yellow color update
02. June 2021
Adding CP100 screw
S319 Torque 0.6 ~ 0.7 Nm
See yellow color update
07. June 2021
Update CP100 screw driver as
PH2
See yellow color update
24. June 2021
Add RX1330M5 screws
See yellow color update
7. July 2021
Add TX1310M5 screws
See yellow color update

Fujitsu PRIMERGY RX1330 M5 Specifications

General

Processor Sockets	1
Memory	Up to 128 GB
Memory Type	DDR4
Form Factor	1U rack server
Memory Slots	4 DIMM slots
Storage	Up to 4x 3.5" or 8x 2.5" drives
RAID Support	RAID 0, 1, 5, 6, 10, 50, 60
Network	2x 1GbE LAN ports
Power Supply	800W