Fujitsu PRIMERGY RX1330 M5 User Manual

4.7.2 Connecting the power cord (hot-plug PSU)
CAUTION
The server automatically adjusts to a mains voltage in the range from
100 V - 240 V
.
▶
You may only operate the server if its rated voltage range
corresponds to the local mains voltage.
▶
Connect the power cord to the PSU.
▶
Connect the mains connector to a grounded mains outlet in the in-house
power supply network.
▶
Ensure that the status indicator on the PSU is lit green, see "Indicator on
hot-plug PSU" on page
358
.
You can secure the power cord with a cable clamp to ensure that the
power cord cannot be disconnected from the server by mistake. The
cable clamp is included in the accessories pack that is delivered
together with the server.
Figure 15: Locking the cable clamp of a PSU
Basic hardware procedures
RX1330 M5 Upgrade and Maintenance Manual 59

Fujitsu PRIMERGY RX1330 M5 Specifications

General

Processor Sockets	1
Memory	Up to 128 GB
Memory Type	DDR4
Form Factor	1U rack server
Memory Slots	4 DIMM slots
Storage	Up to 4x 3.5" or 8x 2.5" drives
RAID Support	RAID 0, 1, 5, 6, 10, 50, 60
Network	2x 1GbE LAN ports
Power Supply	800W