16.2.3.4 Indicator on hot-plug PSU
Figure 282: PSU status indicator
1 PSU status indicator
PSU status indicator (1)
Status Description
flashing green The server is switched off, but mains voltage is present
(standby mode).
green on The server is switched on and operating properly.
flashing orange An overload has been detected. The PSU is still running,
but failure might be imminent.
orange on A PSU failure has been detected.
Possible causes:
– Over/under voltage
–
Overheating
– Fan failure
Appendix A
358 Upgrade and Maintenance Manual RX1330 M5
To Next Page
Loading...
