Fujitsu PRIMERGY RX1330 M5 User Manual

3.3 ENERGY STAR
Products that have been certified compliant with ENERGY
STAR and labelled are in full compliance with the specification
at shipping. Note that energy consumption can be af
fected by
software that is installed or any changes that are made to the
hardware configuration or BIOS or energy options
subsequently. In such cases, the properties guaranteed by
ENERGY STAR can no longer be assured.
The "FUJITSU Software Infrastructure Manager V2.7.0 User's
Guide" contains instructions for reading out measurement
values, including those relating to current energy consumption
and air temperatures. Either the Performance Monitor or the
Task Manager can be used to read out CPU utilization levels.
3.4 CE conformity
The system complies with the requirements of European
Regulations. Find the CE declaration on certificate portal:
https://sp.ts.fujitsu.com/sites/certificates/default.aspx
CAUTION
This is a Class A product. In a domestic environment this product may
cause RF interference.
▶
In this case the user may be required to take adequate measures.
To open the CE declaration applicable for your system, proceed as follows:
▶
Select the product class, e.g. "Industry Standard Servers".
▶
Select the subclass, e.g. "Rack server
".
▶
Select your server
, e.g. "PRIMERGY RX1330 M5".
▶
Select the document, e.g. "CE Cert PRIMERGY RX1330 M5".
Important information
RX1330 M5 Upgrade and Maintenance Manual 39

Fujitsu PRIMERGY RX1330 M5 Specifications

General

Processor Sockets	1
Memory	Up to 128 GB
Memory Type	DDR4
Form Factor	1U rack server
Memory Slots	4 DIMM slots
Storage	Up to 4x 3.5" or 8x 2.5" drives
RAID Support	RAID 0, 1, 5, 6, 10, 50, 60
Network	2x 1GbE LAN ports
Power Supply	800W