Fujitsu PRIMERGY RX1330 M5 User Manual

▶
Install the new Dual microSD 64GB Enterprise, see "Installing the Dual
microSD 64GB Enterprise" on page 320
.
Concluding steps
▶
"Installing the air duct" on page 66.
▶
"Reassembling" on page 53.
▶
"Disconnecting the power cord" on page 47.
▶
"Switching on the server" on page 60.
▶
If applicable, "Installing the front cover with lock" on page 61.
▶
Rebuild will start automatically, see "Performing a RAID array rebuild" on
page 87.
Software configuration
To install the ESXi to the Dual microSD 64GB Enterprise, see "Software
configuration" on page 321.
15.7.5
Replacing the microSD card
Upgrade and Repair Unit
(URU)
Hardware: 5 minutes
Tools: tool-less
Preliminary steps
▶
"Locating the defective server" on page 43
.
▶
If applicable, "Removing the front cover with lock" on page 45.
▶
"Shutting down the server" on page 46.
▶
"Disconnecting the power cord" on page 47.
▶
"Getting access to the component" on page 49.
System board and components
326 Upgrade and Maintenance Manual RX1330 M5

Fujitsu PRIMERGY RX1330 M5 Specifications

General

Processor Sockets	1
Memory	Up to 128 GB
Memory Type	DDR4
Form Factor	1U rack server
Memory Slots	4 DIMM slots
Storage	Up to 4x 3.5" or 8x 2.5" drives
RAID Support	RAID 0, 1, 5, 6, 10, 50, 60
Network	2x 1GbE LAN ports
Power Supply	800W