Preliminary steps
▶
"Suspending BitLocker functionality" on page 69
.
▶
If applicable, "Removing the front cover with lock" on page 45.
▶
"Shutting down the server" on page 46.
▶
"Disconnecting the power cord" on page 47.
▶
"Getting access to the component" on page 49.
▶
Remove the corresponding riser module, see "Removing a riser module" on
page 63.
Removing the expansion card
▶
If necessary, disconnect the cables from the expansion card.
Figure 146: Removing the expansion card - example riser module 1
▶
Pull out the expansion card from the riser card slot.
Expansion cards and backup units
RX1330 M5 Upgrade and Maintenance Manual 201
To Next Page
Loading...
