LCD Requirements (continued)
Stacked TeamPoS 2000 with Digital LCD and Speaker Options
and Analog LCD and Touch Option only
****
5-58 Rev 3.0 90000291
TeamPoS 2000 MAINTENANCE MANUAL
Note: Only 0.65
meter single power
cables can be used
in this configuration.
Other combinations
of 2 and 5 meter
single cables are not
supported.
**** The application software will determine where the touch panels connect to the TeamPoS 2000. The touch cables can be
connected to one of the PC board's COM ports or any male 5VDC connector on the Retail I/O Board (Ports 1, 2 or 5) or
TeamCOMBO Board (Port 1 or 2)
To Next Page
Loading...