Fukuda DS-8500 - Page 81

2-11
Chapter 2 Network System Construction Wireless Network
CAUTION
 When the measurement unit of BP is "kPa", corresponding waveform and numeric data
will not be transmitted. When using a wireless network, use "mmHg" for the BP
measurement unit.
 BP waveform with a scale above the set scale can not be properly transmitted. When
transmitting the BP waveform, pay attention to the displayed BP scale.
 If the measurement unit of CO
2
concentration is mmHg and [99mmHg] is selected for
"Upper Limit of CO
2
(mmHg) Transmission" ([Initial Settings]>[System]>[Telemeter]), the
CO
2
value of 100mmHg or above will be transmitted as 99mmHg.
 When using the Nellcor
TM
unit, the PR value of 255bpm or above will be transmitted to
the central monitor as 254bpm.
REFERENCE
 The waveform not displayed on the home display can not be transmitted.