Geely FC User Manual

52. Remove speed sensor [4G18-3600010].
53. Remove knock sensor.
Remove knock sensor with special tool.
54. Remove water temperature sensor.
Remove water temperature sensor with special tool.
55. Replace engine assembly.
56. Install water temperature sensor.
(a) Install new gasket to water temperature sensor.
(b) Install water temperature sensor with special tool.
Torque:
57. Install knock sensor.
Install knock sensor with special tool.
Torque: m
58. Install speed sensor.
Install speed sensor and harness clips.
Torque:
59. Install phase sensor.
Torque:
60. Install drive belt tensioner device.
Torque: nut: m
Bolt: m
61. Install the hoses on all hose joint of engine.
Install clips and hose.
62. Install oil pressure alerter.
(a) Clean thread of oil pressure alerter and coat adhesive.
Adhesive: anaerobic pipe thread sealing adhesive 1545
(Kesaixin 1545)
(b) Install oil pressure alerter with special tool.
Torque:
63. Install warm air water outlet pipe components.
Install new gasket and warm air water outlet pipe
components.
Torque: nut: m
Bolt:
Engine mechanism - Engine assembly
40

Geely FC Specifications

General

Brand	Geely
Model	FC
Category	Automobile
Language	English