5-10
Operation
Supplement
Perform the settings in Normal mode.
1 Press the [PAUSE/MENU] key.
MENU screen is displayed.
2 Press the [2] key (ARMS).
ARMS SETTING screen (1/4) is displayed.
3 Press the [3] key (MARK SCAN MODE).
MARK SCAN MODE screen is displayed.
4 Press the [1] key (MARK SCAN MODE).
MARK SCAN MODE setting screen is displayed.
Supplement
It will return to MARK SCAN MODE setting
screen without changing the settings when you
press the POSITION ( ) key (PREVIOUS).
5 Press the [1] key (OFF), the [2] key (ARMS), or the [3] key
(AXIS ALIGNMENT).
MARK SCAN MODE is selected and it will return to MARK SCAN MODE
setting screen.
6 Press the [2] key (NUMBER OF POINTS).
NUMBER OF POINTS setting screen is displayed.
Supplement
It will return to MARK SCAN MODE setting
screen without changing the settings when you
press the POSITION ( ) key (PREVIOUS).
7 Press the [1] key (2POINTS), the [2] key (3POINTS), or the [3]
key (4POINTS).
POINTS is selected and it will return to MARK SCAN MODE setting
screen.
To Next Page
Loading...
