GRAPHTEC CE6000 SERIES - About the Default Screen

2-22
The Initial Setup Screen appears only when powering up the machine for the rst time after purchase. Here, you
can set the display language and length unit.
You can also enter the menu select from the READY status after a setup.
P.10-2
Display Language Settings (LANGUAGE SELECTION)
P.10-3
Display Length Unit Settings (LENGTH UNIT)
See "2.6 Connecting to the Power"
P.2-23
for turning on the power.
Operation
1 Once the machine is powered on (with the " | " switch) a
message will be displayed after the version is displayed.
Here, PLEASE DISPLAY LANGUAGE setting screen is displayed.
2 Use the POSITION ( ) keys to select the language.
(This manual assumes you chose the English language
setting.)
3 Press the [ENTER] key.
After the DISPLAY LANGUAGE is selected, the LENGTH UNIT screen
will appear.
4 Press the [1] key (METRIC) or the [2] key (INCH) to select the
length unit setting.
5 Conrm the setting and press the [ENTER] key (SET).
Setting will be set, and it will return to default screen.
2.5
About the Default Screen