GRAPHTEC CE6000 SERIES - Axes Adjustment (4 Point Detection)

5-9
2 axes adjustment (3POINT detection)
Supplement
Distance between the registration marks can
be adjusted.
Multiple registration marks (Alignment
registration mark) is available. (See the
"Multiple registration marks [Alignment
registration mark]
P.5-9
".)
The printable range on the chart to the left
is for when the registration mark detection
movement distance is not specied. The
cutting area changes depending on the
registration mark detection movement
distance that is set.
It will detect the vertical and horizontal tilts from 3 registration marks,
and cut is performed matching the tilt of the print.
Precision of print and cut position will be higher than the 1 axis
adjustment.
Feed direction of media
MARK TYPE 1 MARK TYPE 2
Feed direction of media
Cutting area
4 axes adjustment (4POINT detection)
Supplement
Distance between the registration marks can
be adjusted.
Multiple registration marks (Alignment
registration mark) is available. (See the
"Multiple registration marks [Alignment
registration mark]
P.5-9
".)
The printable range on the chart to the left
is for when the registration mark detection
movement distance is not specied. The
cutting area changes depending on the
registration mark detection movement
distance that is set.
It will detect the left and right vertical tilts and upper and lower
horizontal tilt from 4 registration marks, and cut is performed
matching the tilt of the print.
Precision of print and cut position will be higher than the 2 axes
adjustment.
Feed direction of media
MARK TYPE 1 MARK TYPE 2
Feed direction of media
Cutting area
Multiple registration marks (Alignment registration mark)
Supplement
Setting is only possible from the Graphtec
Studio.
It cannot be set on the plotter.
The data for multiple registration marks
(Alignment registration mark) is not possible.
A function to continuously cut the print with same design aligned,
using a plugin for the Illustrator. It is appropriate for cutting multiple
numbers of stickers or similar.
Feed direction of media