GRAPHTEC CE6000 SERIES - Related to Plotter Environment

10-6
Related to Plotter Environment
Fan Suction Setting (FAN POWER)
This function sets the suction force used to afx media to the plotter.
It may not feed properly if the media is thin, so decrease the suction force.
Operation
Supplement
Perform the settings in Normal mode.
1 Press the [PAUSE/MENU] key in the default screen.
MENU screen is displayed.
2 Press the POSITION ( ) key (ADV.).
ADVANCE setting screen (1/2) is displayed.
3 Press the POSITION ( ) key.
ADVANCE setting screen (2/2) is displayed.
4 Press the [2] key (FAN POWER).
FAN POWER setting screen is displayed.
5 Press the [1] key (NORMAL) or the [2] key (WEAK).
6 Conrm the setting and press the [ENTER] key (SET).
Setting will be set, and it will return to ADVANCE setting screen (2/2).
7 Press the [PAUSE/MENU] key.
It will return to the default screen.