GRAPHTEC CE6000 SERIES - Page 205

10-7
Enabling/Disabling the Beep Setting (BEEP FOR KEY OPERATION)
This function selects whether to enable or disable the beep that is emitted whenever a control panel key is
pressed.
Operation
Supplement
Perform the settings in Normal mode.
1 Press the [PAUSE/MENU] key in the default screen.
MENU screen is displayed.
2 Press the POSITION ( ) key (ADV.).
ADVANCE setting screen (1/2) is displayed.
3 Press the POSITION ( ) key.
ADVANCE setting screen (2/2) is displayed.
4 Press the [3] key (BEEP FOR KEY OPE.).
BEEP FOR KEY OPE. setting screen is displayed.
5 Press the [1] key (ON) or the [2] key (OFF).
6 Conrm the setting and press the [ENTER] key (SET).
Setting will be set, and it will return to ADVANCE setting screen (2/2).
7 Press the [PAUSE/MENU] key.
It will return to the default screen.