10-4
Related to Sensor
Enabling/Disabling the Media Sensors (MEDIA SENSOR)
This function enables or disables the media sensors that detect the size of the medium in the feed direction.
CAUTION
Normally, please use it while set to "ON". Turn it OFF when setting undetectable media with high transmittance. When set to "OFF",
the cutting mat may be damaged. Please be sure to congure the "area".
Operation
Supplement
Perform the settings in Normal mode.
1 Press the [PAUSE/MENU] key in the default screen.
MENU screen is displayed.
2 Press the POSITION ( ) key (ADV.).
ADVANCE setting screen (1/2) is displayed.
3 Press the [4] key (MEDIA SENSOR).
MEDIA SENSOR setting screen is displayed.
4 Press the [1] key (ENABLED) or the [2] key (DISABLED).
5 Conrm the setting and press the [ENTER] key (SET).
Setting will be set, and it will return to ADVANCE setting screen.
6 Press the [PAUSE/MENU] key.
It will return to the default screen.
To Next Page
Loading...
