GRAPHTEC CE6000 SERIES - Page 201

10-3
Setting the Display Length Unit (LENGTH UNIT)
The coordinate values that appear on the display and the other parameters for various settings can be changed
to either meter or inch display.
Operation
1 Press the [PAUSE/MENU] key in the default screen.
MENU screen is displayed.
Menu screen
(Simple mode)
Menu screen
(Normal mode)
2 Press the POSITION ( ) key (ADV.) in Normal mode, or
press the [3] key (ADV.) in Simple mode.
ADVANCE setting screen is displayed.
ADVANCE setting screen
(Simple mode)
ADVANCE setting screen
(Normal mode)
3 Press the [3] key (LENGTH UNIT) in Normal mode, or press
the [2] key (LENGTH UNIT) in Simple mode. LANGUAGE
screen is displayed.
LENGTH UNIT setting screen is displayed.
4 Press the [1] key (METRIC) or the [2] key (INCH).
5 Conrm the setting and press the [ENTER] key (SET).
Setting will be set, and it will return to ADVANCE setting screen.
6 Press the [PAUSE/MENU] key.
It will return to the default screen.