GRAPHTEC CE6000 SERIES - Manually Adjusting the Sensor Level (Threshold Value)

5-22
Manually Adjusting the Sensor Level (Threshold Value)
Scan level (threshold value between the media background color and registration mark) of the sensor scanning
the registration mark is set.
Sensor is adjusted to scan the registration mark written in black lines on white background. Adjust the scan level
of the sensor depending on the color and gloss of the media.
P.5-20
Adjusting the Sensor Level
Operation
1 Press the [PAUSE/MENU] key.
MENU screen is displayed.
2 Press the [2] key (ARMS).
ARMS SETTING screen (1/4) is displayed.
3 Press the POSITION ( ) key.
ARMS SETTING screen (4/4) is displayed.
Supplement
It will return to ARMS setting screen (4/4)
without changing the settings when you
press the POSITION ( ) key (CANCEL).
Detection level will dene the threshold to
be placed at what percentage point of the
signal level difference between the media
background color and the registration mark.
The setting range is 30 to 90%.
X sets the level to detect the registration
mark when moving in the X direction, and Y
sets the level to detect the registration mark
when moving in the Y direction.
4 Press the [2] key (SENSING LEVEL).
SENSING LEVEL screen is displayed.