GRAPHTEC CE6000 SERIES - Pre Feed of Media (Paper or Marking Film)

2-31
The PRE FEED function is used to prevent the loaded media from slipping by automatically advancing the media
the specied length and imprinting it with grit roller marks. This function can also be used to acclimate long media
lengths to the operating environment in order to minimize media expansion and contraction, and to ensure stable
media feed operations.
* When feeding long-axis media (at exceeds 2 meters) on the CE6000-60/120, be sure to use the basket (option).
P.8-4
Perform Automatic Pre Feed When Cut Data is Received
P.8-6
Perform Automatic Pre Feed When Media is Set (Initial Feed)
P.8-7
Setting Feed Speed for the Pre Feed
Operation
Supplement
Perform the settings in Normal mode.
1 Press the [PAUSE/MENU] key in READY status.
MENU screen is displayed.
2 Press the [4] key (MEDIA)
MEDIA SETING screen (1/2) is displayed.
Supplement
Press the POSITION ( ) key (RETURN)
to return to the MEDIA setting screen (1/2)
without changing any settings.
Press the [FAST] key to select the setting
digits.
You can select any digit between 0.5m and
50m.
When you select "SHEET" for paper feeding,
leveling will not take place.
3 Press the [1] key (PRE FEED) .
FEED LENGTH setting screen is displayed.
4 Press the POSITION ( ) key and increase or decrease the
setting value.
5 Conrm the setting and press the [ENTER] key.
Pre feed will start, and it will return to MEDIA SETTING screen (1/2) .
6 Press the [PAUSE/MENU] key.
It will return to default screen.
2.9
Pre Feed of Media (Paper or Marking Film)