GRAPHTEC CE6000 SERIES - When User or Standard Modes Are Selected

5-17
Supplement
It will return to ARMS setting screen (2/4)
without changing the settings when you press
the POSITION ( ) key (CANCEL).
4 Press the [2] key (DISTANCE ADJUST).
DISTANCE ADJUST setting screen is displayed.
5 Press the [1] key (MODE).
DISTANCE ADJUST MODE selection screen is displayed.
Supplement
It will return to MARK DISTANCE screen
without changing the settings when you press
the POSITION ( ) key (PREVIOUS).
6 Press the [1] key (USER), the [2] key (CUSTOM), or the [3]
key (STANDARD).
Mode is selected and it will return to DISTANCE ADJUST screen.
7 The procedures are different depending on the selected
mode.
When USER or STANDARD modes are selected
Jump to step 9.
When CUSTOM mode is selected
Press the [2] key (CUSTOM UNIT).
CUSTOM UNIT selection screen is displayed.
Supplement
It will return to MARK DISTANCE screen
without changing the settings when you press
the POSITION ( ) key (PREVIOUS).
8 Press the [1] key (5mm), the [2] key (10mm), or the[3] key
(50mm).
CUSTOM UNIT is selected and it will return to DISTANCE ADJUST
screen.
9 Conrm the setting and press the [ENTER] key (SET).
Setting will be set, and it will return to ARMS SETTING screen (2/4).
10 Press the [PAUSE/MENU] key.
It will return to default screen.