GRAPHTEC CE6000 SERIES - Indicator Lamp; Reading the Screen (LCD)

2-25
Indicator Lamp
SIMPLE lamp ............. A green light indicates Simple mode is on.
MENU lamp ................ A green light indicates MENU mode is on.
Reading the Screen (LCD)
Information reecting the status will be displayed in the screen of the control panel.
Name of the button and corresponding function is displayed on the screen when a function is allocated to the
button on the control panel. Button name will be displayed in reverse when the button is enabled.
Following items are displayed in the default screen.
This instruction manual will use Normal mode screens to demonstrate everything.
Display of setting condition (Only in Normal mode)
Command : GP GL : GP-GL Command
HP GL : HP-GL Command
No Display : Command Auto-Select
Step size : 0.1 : 0.1 mm
0.05 : 0.05 mm (50 µm)
0.025 : 0.025 mm (25 µm)
0.01 : 0.01 mm (10 µm)
Rotate/Mrror : Mir : Mirror
: R90 : Rotate 90°
: Mir R90 : Mirror and Rotate
Priority : MANUL : Manual priority
: PROGRA : Pogram priority
Sort : Sort ON : Display when sort is on
Prefeed : Pre FEED : Display when automatic media feed is on
Media set lever raised Media set lever lowered
Tool condition currently using
Corresponding button name of control panel
(Valid button is displayed in reverse)
Set condition of media (READY status: It will
display "READY" when the media is loaded)
Default Screen (Ready Screen)
Display of Default Screen (Normal mode) Display of Default Screen (Simple mode)