1-14
Mounting the Roll-medium tray
Mounting (CE6000-40 and the CE6000-60 without stand)
1 Set the roll media tray in using the roll media tray guide rail.
Make sure the rollers on the roll media tray are on the outside
on both sides.
Roll-medium trays
Roll-medium tray
guide rail
Roller
Mounting the Stock shafts
Mounting (CE6000-60)
1 Set one stopper in the stock shaft. (Keep the stopper screws
slightly loose.)
Stock shafts
Stoppers
2 Put the side with the gear on the left side of the machine
(looking from the back) and then slide the stock shaft into the
media stocker.
Slide the media stocker in so that it is bookended by the gear
and the xed stopper. Make sure the stock shaft touches the
roller.
Gear Fixed stopper
Roller
To Next Page
Loading...
