GRAPHTEC CE6000 SERIES - Setting Shape (Pattern) of Registration Mark

5-11
Supplement
It will return to ARMS setting screen (1/4)
without changing the settings when you press
the POSITION ( ) key (CANCEL).
8 Conrm the setting and press the [ENTER] key (SET).
Setting will be set, and it will return to ARMS SETTING screen (1/4).
9 Press the [PAUSE/MENU] key.
It will return to default screen.
Setting Shape (Pattern) of Registration Mark
Preset the shape (pattern) of registration marks to scan.
Operation
Supplement
Perform the settings in Normal mode.
1 Press the [PAUSE/MENU] key.
MENU screen is displayed.
2 Press the [2] key (ARMS).
ARMS SETTING screen (1/4) is displayed.
3 Press the POSITION ( ) key.
ARMS SETTING screen (2/4) is displayed.
Supplement
It will return to ARMS SETTING screen (2/4)
without changing the settings when you press
the POSITION ( ) key (CANCEL).
4 Press the [1] key (MARK TYPE).
MARK TYPE setting screen is displayed.