GRAPHTEC CE6000 SERIES - Setting GP-GL Step Size

11-4
Related to GP-GL Command
A useful chapter when using the GP-GL command.
Setting the Step Size (GP-GL STEP SIZE)
The distance to travel with 1 step can be changed. Match the setting value of the application to be used.
Operation
1 Press the [PAUSE/MENU] key in the default screen.
MENU screen is displayed.
Menu screen
(Simple mode)
Menu screen
(Normal mode)
2 Press the POSITION ( ) key (I/F) in Normal mode, or press
the [2] key (I/F) in Simple mode.
INTERFACE setting screen is displayed.
INTERFACE screen
(Simple mode)
INTERFACE screen
(Normal mode)
3 Press the [4] key (GP-GL STEP SIZE) in Normal mode,
or press the [2] key (GP-GL STEP SIZE) in Simple mode.
LANGUAGE screen is displayed.
GP-GL STEP SIZE setting screen is displayed.
4 Press the [1] key (0.100 mm), the [2] key (0.050 mm), the [3]
key (0.025 mm), or the [4] key (0.010 mm).
5 Conrm the setting and press the [ENTER] key (SET).
Setting will be set, and it will return to INTERFACE setting screen.
6 Press the [PAUSE/MENU] key.
It will return to the default screen.