GRAPHTEC CE6000 SERIES - Connecting with RS-232 C

9-3
Connecting with RS-232C
In Normal mode only, the RS-232C settings can remember up to 4 different settings that can be switched if
necessary.
See "Switching Setting Numbers"
P.9-3
to call out the settings to use, and see "Changing and Storing RS-
232C Settings"
P.9-4
to change and save the settings.
Switching Setting Numbers
Operation
Supplement
Perform the settings in Normal mode.
1 Press the [PAUSE/MENU] key in the default screen.
MENU screen is displayed.
2 Press the POSITION ( ) key (I/F) in Normal mode.
INTERFACE SETTING screen (1/2) is displayed.
3 Press the POSITION ( ) key.
INTERFACE setting screen (2/2) is displayed.
Supplement
It will return to INTERFACE setting screen
without changing the settings when you press
the POSITION ( ) key (CANCEL).
4 Press the [1] key (RS-232C).
RS-232C setting screen is displayed.
5 Press the POSITION ( ) key (RS-232C).
RS-232C setting number select screen is displayed.