9-4
Supplement
There are 4 different setting numbers.
6 Press the POSITION ( ) key, and select the settings
number.
7 Conrm the setting and press the POSITION ( ) key
(CANCEL).
Setting will be set, and it will return to RS-232C setting screen.
8 Press the [PAUSE/MENU] key.
It will return to default screen.
Changing and Storing RS-232C Settings
Operation
Supplement
Perform the settings in Normal mode.
1 Press the [PAUSE/MENU] key in the default screen.
MENU screen is displayed.
2 Press the POSITION ( ) key (I/F) in Normal mode.
INTERFACE setting screen (1/2) is displayed.
3 Press the POSITION ( ) key.
INTERFACE setting screen (2/2) is displayed.
Supplement
It will return to INTERFACE setting screen
without changing the settings when you press
the POSITION ( ) key (CANCEL).
4 Press the [1] key (RS-232C).
RS-232C setting screen is displayed.
To Next Page
Loading...
