GRAPHTEC CE6000 SERIES - Page 197

9-5
Supplement
Baud rate can be set to 19200, 9600, 4800,
2400, 1200, 600, and 300.
5 Press the [1] key (BAUD RATE).
BAUD RATE setting screen is displ ayed.
Supplement
Match the setting value of the application to be
used.
6 Press the POSITION ( ) key and increase or decrease the
setting value.
7 Conrm the setting and press the POSITION ( ) key
(CANCEL).
BAUD RATE will be set, and it will return to RS-232C setting screen.
8 Press the [2] key (DATA BIT).
DATA BIT setting screen is displayed.
Supplement
Match the setting value of the application to
be used.
It will return to RS-232C setting screen
without changing the settings when you
press POSITION ( ) key (CANCEL).
9 Press the [1] key (8 BIT) or the [2] key (7 BIT).
DATA BIT will be set, and it will return to RS-232C setting screen.
10 Press the [3] key (PARITY).
PARITY setting screen is displayed.
Supplement
Match the setting value of the application to
be used.
It will return to RS-232C setting screen
without changing the settings when you
press POSITION ( ) key (CANCEL).
11 Press the [1] key (NONE), [2] key (EVEN), or the [3] key (ODD).
PARITY will be set, and it will return to RS-232C setting screen.