GRAPHTEC CE6000 SERIES - Contents of Operation from [COND;TEST] Key

2-28
Contents of Operation from [COND/TEST] Key
Simple mode
CONDITION screen (1-5): (Simple mode)
The [COND/TEST] key brings up the SETTING screens, where you can change the media type and tool
conditions.
The preset cutting condition is used when the media type is selected.
[COND/TEST]: This will clear the CONDITION screen and return to default screen.
P.2-32
See "2.10 Selecting Tool Condition" for the detailed tool condition.
Normal mode
CONDITION screen (1-3) : (Normal mode)
Tool conditions are set in the setting screens displayed by the [COND/TEST] key.
Up to 8 CONDITION settings can be saved with different settings in numbers 1 through 8.
[COND/TEST]: This will clear the CONDITION screen and return to default screen.
P.2-32
See "2.10 Selecting Tool Condition" for the detailed tool condition.