7-14
Hold the media down against the cutting surface by turning on the PAPER-WEIGHT to prevent decrease of the
quality by the media rising up during scanning of the registration marks.
Turn it off when you need to prevent the smudging of the ink by the PAPER-WEIGHT.
Paper-weight is located under the tool carriage. (It cannot be seen from outside)
Operation
1 Press the [PAUSE/MENU] key.
MENU screen is displayed.
2 Press the [2] key (ARMS).
ARMS SETTING screen (1/4) is displayed.
3 Press the POSITION ( ) key twice.
ARMS SETTING screen (3/4) is displayed.
Supplement
It will return to ARMS setting screen (3/4)
without changing the settings when you press
the POSITION ( ) key (CANCEL).
4 Press the [4] key (PAPER-WEIGHT).
PAPER-WEIGHT setting screen is displayed.
7.7
Setting Paper-Weight
To Next Page
Loading...
