GRAPHTEC CE6000 SERIES - 1.3 Assembling

1-9
Assemble the stand.
The stand is made up of the following parts.
CE6000-60
Stand side bar × 2 Stand foot × 2 Center bar × 1 Allen wrench (for M5
screws) × 1
Socket head cap screw
(M5) × 12
Stock shaft × 2Media stocker × 2
Coin screw × 4Stopper × 2
CE6000-120
Stand side bar × 2 Stand foot × 2 Center bar × 1 Allen wrench (for M5
screws) × 1
Socket head cap screw
(M5) × 30
Stock shaft × 2Media stocker × 2 Media guide bar × 1Stopper × 2
1.3
Assembling