5-20
Adjusting the Sensor Level
Scan level (threshold value between the media background color and registration mark) of the sensor scanning
the registration mark is automatically adjusted.
Sensor is adjusted to scan the registration mark written in black lines on white background. Readjust the scan
level of the sensor depending on the color and gloss of the media.
If it is hard to adjust the level automatically due to media surface characteristics, adjust the scan level of the
sensor manually.
Operation
Supplement
See "Loading Media (Paper or Marking Film)"
P.2-6
for setting the media.
Standard registration mark patterns are in
the [ARMSTest Files] folder on the attached
DVD.
Registration
Mark
File
format
File name
MARK TYPE 1
pdf
ARMStest_type1.
pdf
eps
ARMStest_type1.
eps
MARK TYPE 2
pdf
ARMStest_type2.
pdf
eps
ARMStest_type2.
eps
For level adjustment pattern, please use the
registration mark color and registration mark
line width for the media in use.
1 Level adjustment patterns can be printed on media that uses
the patterns included on the attached DVD, or set to media
with level adjustment patterns.
Feed direction of media
Level adjustment pattern
2 Press the [PAUSE/MENU] key.
MENU screen is displayed.
3 Press the [2] key (ARMS).
ARMS SETTING screen (1/4) is displayed.
4 Press the POSITION ( ) key twice.
ARMS SETTING screen (3/4) is displayed.
Supplement
It will return to ARMS SETTING screen (3/4)
without changing the settings when you press
the POSITION ( ) key (CANCEL).
5 Press the [2] key (SENSOR ADJUST).
SENSOR ADJUST screen is displayed.
To Next Page
Loading...
